SOLVED: HP Deskjet 2652 will not Connect to Wifi Network

Step-1 Restart

First, try to power cycle your computer, wireless router, and the HP Deskjet 2652 printer as per the instructions given below.

Turn off the HP Deskjet 2652 printer.
After 10 seconds, detach the machine’s power cord from the machine and an electrical socket.
Also, you have to turn off your computer or device you used to perform the printer functions.
Attach the power cord to the HP Deskjet 2652 printer and the electrical socket.
Make sure to turn on the computer or device.
Hold the Power button on the control panel of the HP Deskjet 2652 printer.
Disconnect the wireless router’s power cable from the wireless router and the wall outlet.
After 10 seconds of an interval, reattach the power cable between the wireless router and the wall outlet.
Now, you can connect the HP Deskjet 2652 printer to the wireless network.

Use any one of the procedures provided below to establish a wireless network connection to the HP Deskjet 2652 printer.

Connecting printer via a temporary USB connection

Use a USB cable to establish a hardware connection between the HP Deskjet 2652 printer and your computer. Later, change it to wireless.

Download the HP printer software from the official HP website and install it on the computer by following the on-screen prompts.

Once done, launch the HP Printer Assistant software and go to the Utilities tab.

elect the Printer Setup & Software option followed by the Reconfigure Wireless Settings option.

Continue with the on-screen guidelines to modify the wireless settings.

If prompted, plug the USB cable to the HP Deskjet 2652 printer and the computer and then enter the WEP or WPA key (network security key).

This network information is found at the rear side of the wireless router’s sticker.

Check if the Wireless LED remains lit and then turns blue. Now, the HP deskjet 2652 will not connect to Wifi issue was fixed successfully.

If your wireless router supports WPS method, follow the guidelines below

Ensure that the HP Deskjet 2652 printer is turned On or not

Find the Wi-Fi button on the printer and hold it for approximately 5 seconds.

Go to your wireless router, search for the WPS button, and press it.

Do not hold the WPS button on the wireless router for not more than 5 seconds.

If the printer is connected to the wireless network successfully, you will see that the LED stays blue.

The HP Smart app is compatible with Windows, Mac, Android, and iOS Operating Systems.

Below are the instructions to connect the HP Deskjet 2652 printer to a wireless network using the HP Smart app on your Windows computer.

Make sure to connect your computer to a wireless network. Download the HP Smart app from the Microsoft Store and install it on your Windows computer.
The HP Deskjet 2652 printer should be kept turned on.
Press the Wireless and Cancel buttons at the same time to reset the network settings of the printer.
Once you see both the Power and Wireless LEDs blinking, go to the Windows computer, launch the HP Smart app, and select the Printer icon.
The HP Smart app searches for the HP Deskjet 2652 printer when you select the Set Up a New Printer option followed by the Continue option.
Once you select the model name of the printer, click the Continue option and type the WPA key (network name) of your wireless router.
Select the Continue option followed by the Exit Setup option. The Wireless LED turns blue.
If the HP Deskjet 2652 will not Connect to Wifi issue does not resolve, get assistance from our technical support experts. Click the Call button to contact them.